Industrial > Endmills > Roughing
Roughing Endmills – NR (Normal) – R30 WN – Long
E147NR (normal) Rougher R30 WN
NR geometry allows for heavy cuts
Suitable for materials up to 1000 N/mm2
TiCN For longer tool life
Item #
Diameter d1 (mm)
Diameter d1 (inch)
Length l1 (mm)
Length l2 (mm)
Diameter d2 (mm)
Diameter d2 (inch)
z
Info
E1470600
6.00
-
68
24
6
-
3
- Pack Qty: 1
- Barcode: 9311963149745
- Order Multiple: 1
E1470600
E1470800
8.00
-
88
38
10
-
3
- Pack Qty: 1
- Barcode: 9311963149752
- Order Multiple: 1
E1470800
E1471000
10.00
-
95
45
10
-
4
- Pack Qty: 1
- Barcode: 9311963150000
- Order Multiple: 1
E1471000
E1471200
12.00
-
110
53
12
-
4
- Pack Qty: 1
- Barcode: 9311963138695
- Order Multiple: 1
E1471200
E1471270
12.70
1/2
110
52
-
1/2
4
- Pack Qty: 1
- Barcode: 9311963141329
- Order Multiple: 1
E1471270
E1471588
15.88
5/8
123
63.5
-
5/8
4
- Pack Qty: 1
- Barcode: 9311963141336
- Order Multiple: 1
E1471588
E1471600
16.00
-
123
63
16
-
4
- Pack Qty: 1
- Barcode: 9311963138701
- Order Multiple: 1
E1471600
E1471800
18.00
-
123
63
16
-
4
- Pack Qty: 1
- Barcode: 9311963159546
- Order Multiple: 1
E1471800
E1471905
19.05
3/4
141
74.5
-
3/4
4
- Pack Qty: 1
- Barcode: 9311963141510
- Order Multiple: 1
E1471905
E1472000
20.00
-
141
75
20
-
4
- Pack Qty: 1
- Barcode: 9311963138718
- Order Multiple: 1
E1472000
E1472200
22.00
-
141
75
20
-
5
- Pack Qty: 1
- Barcode: 9311963159553
- Order Multiple: 1
E1472200
E1472500
25.00
-
166
90
25
-
5
- Pack Qty: 1
- Barcode: 9311963138725
- Order Multiple: 1
E1472500
E1472540
25.40
1
167
90.5
-
1
5
- Pack Qty: 1
- Barcode: 9311963141343
- Order Multiple: 1
E1472540
E1473000
30.00
-
166
90
25
-
6
- Pack Qty: 1
- Barcode: 9311963149769
- Order Multiple: 1
E1473000
E1473175
31.75
1-1/4
186
106
-
1/4
6
- Pack Qty: 1
- Barcode: 9311963141350
- Order Multiple: 1
E1473175
E1473810
38.10
1-1/2
217
124.5
-
1/4
6
- Pack Qty: 1
- Barcode: 9311963141367
- Order Multiple: 1
E1473810
- NR (normal) Rougher R30 WN
- NR geometry allows for heavy cuts
- Suitable for materials up to 1000 N/mm2
- TiCN For longer tool life
ISO | VDI | Description | Condition | Hardness | Strength | Optimal |
---|---|---|---|---|---|---|
P | 1 | Steel - Non-alloy, cast & free cutting (~ 0.15 %C) | Annealed | 125MPa | 440MPa | |
P | 2 | Steel - Non-alloy, cast & free cutting (~ 0.45 %C) | Annealed | 190MPa | 640MPa | |
P | 3 | Steel - Non-alloy, cast & free cutting (~ 0.45 %C) | Quenched & Tempered | 250MPa | 840MPa | |
P | 4 | Steel - Non-alloy, cast & free cutting (~ 0.75 %C) | Annealed | 270MPa | 910MPa | |
P | 5 | Steel - Non-alloy, cast & free cutting (~ 0.75 %C) | Quenched & Tempered | 300MPa | 1010MPa | |
P | 6 | Steel - Low alloy & cast < 5% of alloying elements | Annealed | 180MPa | 610MPa | |
P | 7 | Steel - Low alloy & cast < 5% of alloying elements | Quenched & Tempered | 275MPa | 930MPa | |
P | 8 | Steel - Low alloy & cast < 5% of alloying elements | Quenched & Tempered | 300MPa | 1010MPa | |
P | 9 | Steel - Low alloy & cast < 5% of alloying elements | Quenched & Tempered | 350HB | 1180MPa | |
P | 10 | Steel - High alloy, cast & tool | Annealed | 200HB | 680MPa | |
P | 11 | Steel - High alloy, cast & tool | Hardened & Tempered | 325HB | 1100MPa | |
P | 12 | Steel - Corrosion resistant & cast - Ferritic / Martensitic | Annealed | 200HB | 680MPa | |
P | 13 | Steel - Corrosion resistant & cast - Martensitic | Quenched & Tempered | 240HB | 810MPa | |
M | 14.1 | Stainless Steel - Austenitic | Age Hardened | 180HB | 610MPa | |
M | 14.2 | Stainless Steel - Duplex | 250HB | 840MPa | ||
M | 14.3 | Stainless Steel - Precipitation Hardening | 250HB | 840MPa | ||
K | 15 | Cast Iron, Grey (GG) - Ferritic / Pearlitic | 180MPa | 610MPa | ||
K | 16 | Cast Iron, Grey (GG) - Pearlitic | 260HB | 880MPa | ||
K | 17 | Cast Iron, Nodular (GGG) - Ferritic | 160MPa | 570MPa | ||
K | 18 | Cast Iron, Nodular (GGG) - Pearlitic | 250HB | 840MPa | ||
K | 19 | Cast Iron, Malleable - Ferritic | 130MPa | 460MPa | ||
K | 20 | Cast Iron, Malleable - Pearlitic | 230HB | 780MPa | ||
N | 21 | Aluminum & Magnesium, wrought alloy - Non Heat Treatable | 60MPa | 210MPa | ||
N | 22 | Aluminum & Magnesium, wrought alloy - Heat Treatable | Age Hardened | 100MPa | 360MPa | |
N | 23 | Aluminum & Magnesium, cast alloy ?12% Si - Non Heat Treatable | 75MPa | 270MPa | ||
N | 24 | Aluminum & Magnesium, cast alloy ?12% Si - Heat Treatable | Age Hardened | 90MPa | 320MPa | |
N | 25 | Aluminum & Magnesium, cast alloy >12% Si - Non Heat Treatabl | 130HB | 460MPa | ||
N | 26 | Copper & Copper alloys (Brass/Bronze) - Free cutting, Pb > 1% | 110MPa | 390MPa | ||
N | 27 | Copper & Copper alloys (Brass/Bronze) - Brass (CuZn, CuSnZn) | 90HB | 320MPa | ||
N | 28 | Copper & Copper alloys (Brass/Bronze) - Bronze (CuSn) | 100MPa | 360MPa | ||
N | 29 | Non-metallic - Thermosetting & fiber-reinforced plastics | ||||
N | 30 | Non-metallic - Hard rubber, wood etc. | ||||
S | 31 | High temperature alloys - Fe based | Annealed | 200HB | 680MPa | |
S | 32 | High temperature alloys - Fe based | Age Hardened | 280HB | 950MPa | |
S | 33 | High temperature alloys - Ni / Co based | Annealed | 250HB | 840MPa | |
S | 34 | High temperature alloys - Ni / Co based | Age Hardened | 350HB | 1180MPa | |
S | 35 | High temperature alloys - Ni / Co based | Cast | 320HB | 1080MPa | |
S | 36 | Titanium & Titanium alloys - CP Titanium | 400MPa | |||
S | 37.1 | Titanium & Titanium alloys - Alpha alloys | 860MPa | |||
S | 37.2 | Titanium & Titanium alloys - Alpha / Beta alloys | Annealed | 960MPa | ||
S | 37.3 | Titanium & Titanium alloys - Alpha / Beta alloys | Age Hardened | 1170MPa | ||
S | 37.4 | Titanium & Titanium alloys - Beta alloys | Annealed | 830MPa | ||
S | 37.5 | Titanium & Titanium alloys - Beta alloys | Age Hardened | 1400MPa | ||
H | 38.1 | Hardened steel | Hardened & Tempered | 45HRC | ||
H | 38.2 | Hardened steel | Hardened & Tempered | 55HRC | ||
H | 39.1 | Hardened steel | Hardened & Tempered | 58HRC | ||
H | 39.2 | Hardened steel | Hardened & Tempered | 62HRC | ||
H | 40 | Cast Iron - Chilled | Cast | 400HB | 1350MPa | |
H | 41 | Cast Iron | Hardened & Tempered | 55HRC |
KEY
Designation
WN
Material
HSS Co.8
Finish
TiCN
Shank Form
A
Helix Angle
R30
Point Tolerance
js14
Shank Tolerance
h6
Point Form
45° Corner Chamfer
Standard
DIN844L