Spiral Flute > Industrial > Taps
Spiral Flute Taps – R45 W
T242Suitable for use in soft materials
Blind holes
Depths up to 3 x d1
Item #
Size
Limit
Lead
Length l1 (mm)
Length l2 (mm)
Diameter d2 (mm)
sq
Length l4 (mm)
z
Info
T2420600
M6x1
ISO 2 / 6H
-
80
10
4.5
3.4
6
3
- Pack Qty: 1
- Barcode: 9311963401096
- Order Multiple: 1
T2420600
T2420800
M8x1.25
ISO 2 / 6H
-
90
12.5
6
4.9
8
3
- Pack Qty: 1
- Barcode: 9311963401102
- Order Multiple: 1
T2420800
T2421000
M10x1.5
ISO 2 / 6H
-
100
15
7
5.5
8
3
- Pack Qty: 1
- Barcode: 9311963401119
- Order Multiple: 1
T2421000
T2421200
M12x1.75
ISO 2 / 6H
-
110
17.5
9
7
10
3
- Pack Qty: 1
- Barcode: 9311963401034
- Order Multiple: 1
T2421200
T2421400
M14x2
ISO 2 / 6H
-
110
20
11
9
12
3
- Pack Qty: 1
- Barcode: 9311963401041
- Order Multiple: 1
T2421400
T2421600
M16x2
ISO 2 / 6H
-
110
20
12
9
12
4
- Pack Qty: 1
- Barcode: 9311963401058
- Order Multiple: 1
T2421600
T2421800
M18x2.5
ISO 2 / 6H
-
125
25
14
11
14
4
- Pack Qty: 1
- Barcode: 9311963401065
- Order Multiple: 1
T2421800
T2422000
M20x2.5
ISO 2 / 6H
-
140
25
16
12
15
4
- Pack Qty: 1
- Barcode: 9311963401072
- Order Multiple: 1
T2422000
- Suitable for use in soft materials
- Blind holes
- Depths up to 3 x d1
ISO | VDI | Description | Condition | Hardness | Strength | Optimal |
---|---|---|---|---|---|---|
P | 1 | Steel - Non-alloy, cast & free cutting (~ 0.15 %C) | Annealed | 125MPa | 440MPa | |
P | 2 | Steel - Non-alloy, cast & free cutting (~ 0.45 %C) | Annealed | 190MPa | 640MPa | |
P | 3 | Steel - Non-alloy, cast & free cutting (~ 0.45 %C) | Quenched & Tempered | 250MPa | 840MPa | |
P | 4 | Steel - Non-alloy, cast & free cutting (~ 0.75 %C) | Annealed | 270MPa | 910MPa | |
P | 5 | Steel - Non-alloy, cast & free cutting (~ 0.75 %C) | Quenched & Tempered | 300HB | 1010MPa | |
P | 6 | Steel - Low alloy & cast < 5% of alloying elements | Annealed | 180MPa | 610MPa | |
P | 7 | Steel - Low alloy & cast < 5% of alloying elements | Quenched & Tempered | 275MPa | 930MPa | |
P | 8 | Steel - Low alloy & cast < 5% of alloying elements | Quenched & Tempered | 300HB | 1010MPa | |
P | 9 | Steel - Low alloy & cast < 5% of alloying elements | Quenched & Tempered | 350HB | 1180MPa | |
P | 10 | Steel - High alloy, cast & tool | Annealed | 200HB | 680MPa | |
P | 11 | Steel - High alloy, cast & tool | Hardened & Tempered | 325HB | 1100MPa | |
P | 12 | Steel - Corrosion resistant & cast - Ferritic / Martensitic | Annealed | 200HB | 680MPa | |
P | 13 | Steel - Corrosion resistant & cast - Martensitic | Quenched & Tempered | 240HB | 810MPa | |
M | 14.1 | Stainless Steel - Austenitic | Age Hardened | 180HB | 610MPa | |
M | 14.2 | Stainless Steel - Duplex | 250HB | 840MPa | ||
M | 14.3 | Stainless Steel - Precipitation Hardening | 250HB | 840MPa | ||
K | 15 | Cast Iron, Grey (GG) - Ferritic / Pearlitic | 180HB | 610MPa | ||
K | 16 | Cast Iron, Grey (GG) - Pearlitic | 260HB | 880MPa | ||
K | 17 | Cast Iron, Nodular (GGG) - Ferritic | 160HB | 570MPa | ||
K | 18 | Cast Iron, Nodular (GGG) - Pearlitic | 250HB | 840MPa | ||
K | 19 | Cast Iron, Malleable - Ferritic | 130HB | 460MPa | ||
K | 20 | Cast Iron, Malleable - Pearlitic | 230HB | 780MPa | ||
N | 21 | Aluminum & Magnesium, wrought alloy - Non Heat Treatable | 60MPa | 210MPa | ||
N | 22 | Aluminum & Magnesium, wrought alloy - Heat Treatable | Age Hardened | 100MPa | 360MPa | |
N | 23 | Aluminum & Magnesium, cast alloy ≤12% Si - Non Heat Treatabl | 75HB | 270MPa | ||
N | 24 | Aluminum & Magnesium, cast alloy ≤12% Si - Heat Treatable | Age Hardened | 90HB | 320MPa | |
N | 25 | Aluminum & Magnesium, cast alloy >12% Si - Non Heat Treatabl | 130HB | 460MPa | ||
N | 26 | Copper & Copper alloys (Brass/Bronze) - Free cutting, Pb > 1% | 110MPa | 390MPa | ||
N | 27 | Copper & Copper alloys (Brass/Bronze) - Brass (CuZn, CuSnZn) | 90HB | 320MPa | ||
N | 28 | Copper & Copper alloys (Brass/Bronze) - Bronze (CuSn) | 100MPa | 360MPa | ||
N | 29 | Non-metallic - Thermosetting & fiber-reinforced plastics | ||||
N | 30 | Non-metallic - Hard rubber, wood etc. | ||||
S | 31 | High temperature alloys - Fe based | Annealed | 200HB | 680MPa | |
S | 32 | High temperature alloys - Fe based | Age Hardened | 280HB | 950MPa | |
S | 33 | High temperature alloys - Ni / Co based | Annealed | 250HB | 840MPa | |
S | 34 | High temperature alloys - Ni / Co based | Age Hardened | 350HB | 1180MPa | |
S | 35 | High temperature alloys - Ni / Co based | Cast | 320HB | 1080MPa | |
S | 36 | Titanium & Titanium alloys - CP Titanium | 400MPa | |||
S | 37.1 | Titanium & Titanium alloys - Alpha alloys | 860MPa | |||
S | 37.2 | Titanium & Titanium alloys - Alpha / Beta alloys | Annealed | 960MPa | ||
S | 37.3 | Titanium & Titanium alloys - Alpha / Beta alloys | Age Hardened | 1170MPa | ||
S | 37.4 | Titanium & Titanium alloys - Beta alloys | Annealed | 830MPa | ||
S | 37.5 | Titanium & Titanium alloys - Beta alloys | Age Hardened | 1400MPa | ||
H | 38.1 | Hardened steel | Hardened & Tempered | 45HRC | ||
H | 38.2 | Hardened steel | Hardened & Tempered | 55HRC | ||
H | 39.1 | Hardened steel | Hardened & Tempered | 58HRC | ||
H | 39.2 | Hardened steel | Hardened & Tempered | 62HRC | ||
H | 40 | Cast Iron - Chilled | Cast | 400HB | 1350MPa | |
H | 41 | Cast Iron | Hardened & Tempered | 55HRC |
KEY
Designation
W
Material
HSSE
Finish
TiN
Max Cut Depth
3xD
Shank Form
A
Helix Angle
R45
Standard
DIN376
Thread Form
Metric
Thread Tolerance Class
6H
Lead
Form C